Snmp-1004; Snmp-1005; Snmp-1006; Snmp-1007 - Brocade Communications Systems SN3000B Reference

96

SNMP-1004

SNMP-1004
Message
<timestamp>, [SNMP-1004], <sequence-number>, FFDC, ERROR, <system-name>,
Incorrect SNMP configuration.
Probable Cause Indicates that the SNMP configuration is incorrect and therefore the SNMP service will not work
correctly.
Recommended Change the SNMP configuration to default using the snmpConfig
Action
Severity ERROR

SNMP-1005

Message
<timestamp>, [SNMP-1005], <sequence-number>,, INFO, <system-name>, SNMP
configuration attribute, <Changed attribute>, has changed from <Old Value> to <New
Value>.
Probable Cause Indicates that SNMP configuration has changed. The modified parameter and the old and new
parameter values are displayed in the message.
Recommended Execute the snmpConfig
Action
Severity INFO

SNMP-1006

Message
<timestamp>, [SNMP-1006], <sequence-number>,, INFO, <system-name>, <SNMP
Configuration group> configuration was reset to default.
Probable Cause Indicates that the specified SNMP configuration group was reset to the factory default.
Recommended Execute the snmpConfig
Action
Severity INFO

SNMP-1007

Message
<timestamp>, [SNMP-1007], <sequence-number>,, INFO, <system-name>, The last
fabric change happened at: <string>.
Probable Cause Indicates the last fabric change time.
Recommended Execute the fabricshow command to view the current fabric status.
Action
Severity INFO
646
show command to view the new SNMP configuration.
--
show for the group to view the new SNMP configuration.
--
default command.
--
Fabric OS Message Reference
53-1002448-01