Bl-1031; Bl-1032; Bl-1033; Bl-1034 - Brocade Communications Systems SN3000B Reference

BL-1031

Message
<timestamp>, [BL-1031], <sequence-number>,, CRITICAL, <system-name>, Link timeout
in internal port (slot <Slot number>, port <Port number>) resulted in blade fault.
Use slotpoweroff/slotpoweron to recover the blade.
Probable Cause Indicates that link timeout occurred in one of the backend internal ports.
Recommended Power cycle the blade or run the slotPowerOff and slotPowerOn commands.
Action
Severity CRITICAL

BL-1032

Message
<timestamp>, [BL-1032], <sequence-number>,, CRITICAL, <system-name>, (slot <slot
number>,bitmap 0x<object control flags(bitmap)>) ports never came up ONLINE
(reason <reason for port disable>, state <status of the blade>). Disabling slot.
Probable Cause Indicates that back-end (non-user) ports have not come ONLINE within time limit.
Recommended Restart or power cycle the blade. Run the diagPost command to ensure that Power-On Self-Test
Action (POST) is enabled. If the message persists, replace the blade.
Severity CRITICAL

BL-1033

Message
<timestamp>, [BL-1033], <sequence-number>,, CRITICAL, <system-name>, (slot <slot
number>,bitmap 0x<object control flags(bitmap)>) No disable acknowledgment from
ports (state <status of the blade>). Disabling slot.
Probable Cause Indicates that the system has timed out while waiting for disable messages from the user ports
after disabling the ports.
Recommended Restart or power cycle the blade. Run the diagPost command to ensure that Power-On Self-Test
Action (POST) is enabled. If the message persists, replace the blade.
Severity CRITICAL

BL-1034

Message
<timestamp>, [BL-1034], <sequence-number>,, INFO, <system-name>, Slot
number>
Probable Cause Indicates that the slot has completed initializing Fibre Channel (FC) ports.
Fabric OS Message Reference
53-1002448-01
FC Initialization completed.
7
BL-1031
<slot
81