Cdr-1016; Cdr-1017; Cdr-1018; Cdr-1019 - Brocade Communications Systems SN3000B Reference

Recommended Whenever this error is observed persistently, power cycle the specified blade. If the problem
Action persists, replace the blade.
Severity WARNING

CDR-1016

Message
<timestamp>, [CDR-1016], <sequence-number>,, ERROR, <system-name>, Port is
faulted due to port re-initialization failure on internal Port S<slot
number>,P<port number>(<blade port number>) with reason <port fault reason>.
Probable Cause Indicates that port is faulted due to port re-initialization failure.
Recommended Whenever this error is observed persistently, power cycle the specified blade. If the problem
Action persists, replace the blade.
Severity ERROR

CDR-1017

Message
<timestamp>, [CDR-1017], <sequence-number>,, ERROR, <system-name>, Blade in Slot
<slot number> faulted due to unavailable ports in internal Trunk.
Probable Cause Indicates that blade is faulted due to unavailable ports in internal trunk.
Recommended Whenever this error is observed persistently, power cycle the specified blade. If the problem
Action persists, replace the blade.
Severity ERROR

CDR-1018

Message
<timestamp>, [CDR-1018], <sequence-number>,, ERROR, <system-name>, Blade in Slot
<slot number> faulted due to Link reset threshold value exceeded.
Probable Cause Indicates that blade is faulted due to Link reset threshold exceeded.
Recommended Whenever this error is observed persistently, power cycle the specified blade. If the problem
Action persists, replace the blade.
Severity ERROR

CDR-1019

Message
<timestamp>, [CDR-1019], <sequence-number>,, WARNING, <system-name>, S<slot
number>,C<chip index>: HW ASIC Chip TXQ FID parity error threshold reached type =
0x<chip error type>.
Probable Cause Indicates an internal error in the ASIC hardware that may degrade data traffic.
Fabric OS Message Reference
53-1002448-01
15
CDR-1016
119