Ficn-1043; Ficn-1044; Ficn-1045 - Brocade Communications Systems SN3000B Reference

38

FICN-1043

FICN-1043
Message
<timestamp>, [FICN-1043], <sequence-number>,, ERROR, <system-name>,
HostTapeIng::FICON Selective Reset:Path=<VEPortNumber HostDomain HostPort
DeviceDomain> <DevicePort LPAR CUADDR DeviceAddr> state=0x<the current emulation
state for this device> LastCmds=0x<the last 4 commands received from the channel
for this device> LastStatus=0x<the last 4 status values presented to the channel
for this device>.
Probable Cause Indicates that protocol errors in emulation in the CU or network errors can cause a Selective Reset.
Recommended If this was an unexpected event, contact your vendor's customer support for assistance.
Action
Severity ERROR

FICN-1044

Message
<timestamp>, [FICN-1044], <sequence-number>,, ERROR, <system-name>,
HostTapeIng:FICON Selective Reset:Path=<VEPortNumber HostDomain HostPort
DeviceDomain> <DevicePort LPAR CUADDR DeviceAddr>Elapsed Time=<the number of
seconds since the last IO started for this device>.<the number of milliseconds
since the last IO started for this device> seconds.
Probable Cause Indicates that protocol errors in emulation in the CU or network errors can cause Selective Reset.
Recommended If this was an unexpected event, contact your vendor's customer support for assistance.
Action
Severity ERROR

FICN-1045

Message
<timestamp>, [FICN-1045], <sequence-number>,, WARNING, <system-name>,
HostTapeIng:FICON Purge received:Path=<VEPortNumber HostDomain HostPort
DeviceDomain> <DevicePort LPAR CUADDR DeviceAddr>.
Probable Cause Indicates a purge path was received from the locally connected FICON channel. This is performed
during the path recovery.
Recommended If this was an unexpected event, contact your vendor's customer support for assistance.
Action
Severity WARNING
292 Fabric OS Message Reference
53-1002448-01