An-1006; An-1010; An-1011 - Brocade Communications Systems SN3000B Reference

117

AN-1006

Recommended No action is required.
Action
Severity INFO
AN-1006
Message
<Sequence Number> AUDIT, <timestamp>, [AN-1006], INFO, FABRIC,
<event-initiator-details>, <event-location>, , Bottleneck detection configuration
is successfully changed.
Probable Cause Indicates that the bottleneck detection configuration was changed by a user.
Recommended No action is required.
Action
Severity INFO

AN-1010

Message
<Sequence Number> AUDIT, <timestamp>, [AN-1010], WARNING, FABRIC,
<event-initiator-details>, <event-location>, , Severe latency bottleneck detected
at Slot <slot number> port <port number within slot number>.
Probable Cause Indicates credit loss at the specified port, a downstream port, or a very high latency device at the
edge of the fabric.
Recommended Contact your vendor's customer support for assistance.
Action
Severity WARNING

AN-1011

Message
<Sequence Number> AUDIT, <timestamp>, [AN-1011], WARNING, FABRIC,
<event-initiator-details>, <event-location>, , Could not distinguish between
primary and dependent severe latency bottleneck on slot <slot number> port <port
number within slot number> because port mirroring is enabled on this port.
Probable Cause Indicates that resources needed to determine whether there is complete credit loss on a VC at this
port are in use by port mirroring.
Recommended Contact your vendor's customer support for assistance.
Action
Severity WARNING
774 Fabric OS Message Reference
53-1002448-01