Ns-1007; Ns-1008; Ns-1009; Ns-1010 - Brocade Communications Systems SN3000B Reference

NS-1007

Message
<timestamp>, [NS-1007], <sequence-number>,, WARNING, <system-name>, NS has
detected a logical ISL port <LISL port number> in TI zone <TI zone name> in fabric
<Fabric ID>. Routing may not be setup correctly.
Probable Cause Indicates that a logical ISL is detected in the TI zone.
Recommended Remove the LISL port from the TI zone because the routing may not be set up correctly.
Action
Severity WARNING

NS-1008

Message
<timestamp>, [NS-1008], <sequence-number>,, WARNING, <system-name>, Open FR
license not installed.
Probable Cause Indicates that local devices involved in Open FR will not function without the required licensing.
Recommended Either install the Open FR license or relocate Open FR devices to a licensed switch.
Action
Severity WARNING

NS-1009

Message
<timestamp>, [NS-1009], <sequence-number>,, WARNING, <system-name>, NS has
detected a device with node wwn as zero, pid 0x<device PID>.
Probable Cause Indicates that a port has logged in with node wwn as zero, DCFM wont show port connectivity.
Recommended Check the device that logged in. The device could be misbehaving.
Action
Severity WARNING

NS-1010

Message
<timestamp>, [NS-1010], <sequence-number>,, WARNING, <system-name>, CSCTL mode
enabled on port <csctlport> QoS zoning will be ignored for devices on this port.
Probable Cause Indicates the CSCTL mode enabled for a port with devices as members of a QoS zone.
Recommended Remove CSCTL configured devices from QoS zone.
Action
Severity WARNING
Fabric OS Message Reference
53-1002448-01
76
NS-1007
523