Bm-1056; Bm-1058 - Brocade Communications Systems SN3000B Reference

BM-1056

Message
<timestamp>, [BM-1056], <sequence-number>,, INFO, <system-name>, AP is not
configured. Persistently disabling all ports on the switch.
Probable Cause Indicates the policy of the specified switch is to persistently disable all ports the first time the AP is
detected. This may be caused by one of the following:
•
•
Recommended Configure the switch to persistently enable all ports.
Action
Severity INFO

BM-1058

Message
<timestamp>, [BM-1058], <sequence-number>,, WARNING, <system-name>, Download of
AP firmware failed for the switch. Reissue firmwaredownload to recover.
Probable Cause Indicates the automatic firmware upgrade on the application processor (AP) has failed, because
the firmware version running on the AP was detected to be different from the system firmware
because of a firmware upgrade.
Recommended Issue the firmwareDownload command to recover the AP.
Action
Severity WARNING
Fabric OS Message Reference
53-1002448-01
The AP was detected for the first time on this switch.
The switch was configured under a different mode.
10
BM-1056
95