Ficn-2085; Ficn-2086; Ficn-2087 - Brocade Communications Systems SN3000B Reference

38

FICN-2085

Recommended This may be an unexpected event, contact your vendor's customer support for assistance.
Action
Severity WARNING
FICN-2085
Message
<timestamp>, [FICN-2085], <sequence-number>,, INFO, <system-name>, FICON or FCP
Emulation Enabled FCIP Tunnel is Up on VEPort=<VEPortNumber>.
Probable Cause Indicates a FICON or FCP Emulation Enabled FCIP tunnel has been established successfully to the
peer switch.
Recommended No action is required.
Action
Severity INFO

FICN-2086

Message
<timestamp>, [FICN-2086], <sequence-number>,, ERROR, <system-name>, FICON or FCP
Emulation Enabled FCIP Tunnel is Up on VEPort=<VEPortNumber>.
Probable Cause Indicates a FICON or FCP Emulation Enabled FCIP tunnel to the peer switch has been terminated.
Recommended This is an unexpected event, contact your vendor's customer support for assistance.
Action
Severity ERROR

FICN-2087

Message
<timestamp>, [FICN-2087], <sequence-number>,, ERROR, <system-name>, FICON
connected 3900 printer discovered Path=0x<VEPortNumber HostDomain HostPort
DeviceDomain><DevicePort LPAR CUADDR DeviceAddr>-invalid compression mode.
Probable Cause Indicates that FICON Printer emulation is enabled, but cannot be performed for this device due to
the fact that the compression mode on the tunnel is not NONE or Aggressive.
Recommended If you desire FICON Printer Emulation for this device, modify the tunnel compression mode to None
Action (mode 0) or Aggressive (mode 3).
Severity ERROR
320 Fabric OS Message Reference
53-1002448-01