Bls-1003; Bls-1004; Bls-1005 - Brocade Communications Systems SN3000B Reference

9

BLS-1003

BLS-1003
Message
<timestamp>, [BLS-1003], <sequence-number>, INFO, <system-name>, An IPsec/IKE
policy was deleted.
Probable Cause Indicates that an IPsec or IKE policy was deleted and the configuration file was updated.
Recommended No action is required.
Action
Severity INFO

BLS-1004

Message
<timestamp>, [BLS-1004], <sequence-number>,, INFO, <system-name>, Tape Read
Pipelining is being disabled slot (<slot number>) port (<user port index>) tunnel
(<The configured tunnel ID (0-7)>).
Probable Cause Indicates that the FOS version on the remote end of the tunnel does not support the Tape Read
Pipelining feature.
Recommended No action is required.
Action
Severity INFO

BLS-1005

Message
<timestamp>, [BLS-1005], <sequence-number>,, ERROR, <system-name>, S<slot
number>,P<user port index>(<blade index>) [OID 0x<port OID>]: <string name of GE>:
port faulted due to SFP validation failure. Please check if the SFP is valid for
the configuration.
Probable Cause Indicates a deteriorated SFP, an incompatible SFP pair, or a faulty cable between the peer ports.
Recommended Ensure that you are using compatible SFPs on the peer ports. Verify whether the SFPs have
Action deteriorated and the Fibre Channel cable is faulty. Replace the SFPs or cable, if necessary.
Severity ERROR
90 Fabric OS Message Reference
53-1002448-01