Cvlm-1004; Cvlm-1005; Cvlm-1006; Cvlm-1007 - Brocade Communications Systems SN3000B Reference

22

CVLM-1004

CVLM-1004
Message
<timestamp>, [CVLM-1004], <sequence-number>,, WARNING, <system-name>, Crypto
device configuration between local switch (<local switch WWN>) and peer (<peer
switch WWN>) is out of sync. New encryption session is not allowed.
Probable Cause Indicates that EE nodes in the cluster encryption group have different configurations.
Recommended Synchronize the configuration in the cluster group using the cryptocfg
Action the Fabric OS Command Reference Manual for more information on this command.
Severity WARNING

CVLM-1005

Message
<timestamp>, [CVLM-1005], <sequence-number>,, INFO, <system-name>, Crypto service
is <status> on the switch.
Probable Cause Indicates that Crypto service is enabled or disabled on the switch.
Recommended No action is required.
Action
Severity INFO

CVLM-1006

Message
<timestamp>, [CVLM-1006], <sequence-number>,, WARNING, <system-name>, Crypto
device <device WWN> in target container <container name> is not in AD0.
Probable Cause Indicates that the crypto device in the crypto target container is not in AD0.
Recommended Use the ad command to move the crypto device into AD0. Refer to the Fabric OS Command
Action Reference Manual for more information on this command.
Severity WARNING

CVLM-1007

Message
<timestamp>, [CVLM-1007], <sequence-number>,, WARNING, <system-name>, Redirect
zone update failure. Status is <status>.
Probable Cause Indicates that the redirect zone update has failed.
Recommended Issue the cryptocfg
Action for more information on this command.
Severity WARNING
164
commit command again. Refer to the Fabric OS Command Reference Manual
--
commit command. Refer to
--
Fabric OS Message Reference
53-1002448-01