Spc-2012; Spc-2013; Spc-2014; Spc-2040 - Brocade Communications Systems SN3000B Reference

SPC-2012

Message
<timestamp>, [SPC-2012], <sequence-number>,, INFO, <system-name>, S<slot number
containing Encryption Engine>, <module name>: User zeroization command completed
successfully. Tamper INT status <Status>.
Probable Cause Indicates the User zeroization command has completed successfully. The Encryption Engine (EE) is
zeroized.
Recommended Execute the cryptocfg
Action
Severity INFO

SPC-2013

Message
<timestamp>, [SPC-2013], <sequence-number>,, WARNING, <system-name>, S<slot
number containing Encryption Engine>, <module name>: Oscillator Failure Detected.
Probable Cause Indicates hardware failure.
Recommended Shelf life of the system may be reduced. Contact the vendor for further instructions.
Action
Severity WARNING

SPC-2014

Message
<timestamp>, [SPC-2014], <sequence-number>,, WARNING, <system-name>, S<slot
number containing Encryption Engine>, <module name>: Low Battery Level Detected.
Probable Cause Indicates that the battery is depleted.
Recommended System operation will be unaffected while facility power is present. Schedule replacement with the
Action vendor.
Severity WARNING

SPC-2040

Message
<timestamp>, [SPC-2040], <sequence-number>,, ERROR, <system-name>, S<slot number
containing Encryption Engine>, <module name>: SPD Device minornum <MinorNum> is
already open. state <State>.
Probable Cause Indicates that the Security Policy Database (SPD) device has already opened or is busy either for
sysctrld or keyappd.
Fabric OS Message Reference
53-1002448-01
initEE and cryptocfg regEE commands.
-- --
97
SPC-2012
653