Spm-3025; Spm-3026; Spm-3027; Spm-3028 - Brocade Communications Systems SN3000B Reference

136

SPM-3025

SPM-3025
Message
<Sequence Number> AUDIT, <timestamp>, [SPM-3025], INFO, SECURITY,
<event-initiator-details>, <event-location>, , Event: cryptocfg Status: success,
Info: File imported via usb: Source: <sourcePath> Destination:
<destinationFilename>.
Probable Cause Indicates a file was imported via USB device.
Recommended No action is required.
Action
Severity INFO

SPM-3026

Message
<Sequence Number> AUDIT, <timestamp>, [SPM-3026], INFO, SECURITY,
<event-initiator-details>, <event-location>, , Event: cryptocfg Status: success,
Info: File exported via usb: Source: <sourcePath> Destination:
<destinationFilename>.
Probable Cause Indicates a file was exported via USB device.
Recommended No action is required.
Action
Severity INFO

SPM-3027

Message
<Sequence Number> AUDIT, <timestamp>, [SPM-3027], INFO, SECURITY,
<event-initiator-details>, <event-location>, , Event: cryptocfg Status: success,
Info: Recovery card registered.
file: \"<certFilename>\".
Probable Cause Indicates a recovery card was registered.
Recommended No action is required.
Action
Severity INFO

SPM-3028

Message
<Sequence Number> AUDIT, <timestamp>, [SPM-3028], INFO, SECURITY,
<event-initiator-details>, <event-location>, , Event: SPM-EE state changed, Info:
EE State: <EE Status>.
Probable Cause Indicates an EE state has changed.
850
Certificate label: \"<certLabel>\" Certificate
Fabric OS Message Reference
53-1002448-01