Icpd-1001; Icpd-1002; Icpd-1003; Icpd-1004 - Brocade Communications Systems SN3000B Reference

ICPD System Messages

ICPD-1001

Message
<timestamp>, [ICPD-1001], <sequence-number>,, ERROR, <system-name>, Failed to
allocate memory: (<function name>).
Probable Cause Indicates that the specified function failed to allocate memory.
Recommended Check memory usage on the switch using the memShow command.
Action
Reboot or power cycle the switch.
Severity ERROR

ICPD-1002

Message
<timestamp>, [ICPD-1002], <sequence-number>,, ERROR, <system-name>, Failed to
initialize <module> rc = <error>.
Probable Cause Indicates that an initialization of a module within the ICPD failed.
Recommended Download a new firmware version using the firmwareDownload command. Refer to the Fabric OS
Action Command Reference for more information on this command.
Severity ERROR

ICPD-1003

Message
<timestamp>, [ICPD-1003], <sequence-number>,, INFO, <system-name>, iSCSI
configuration has been committed by switch (<domain id>).
Probable Cause Indicates the iSCSI configuration has been committed by a remote switch in the fabric.
Recommended No action is required.
Action
Severity INFO

ICPD-1004

Message
<timestamp>, [ICPD-1004], <sequence-number>,, WARNING, <system-name>, iSNS Client
service is detected on multiple switches in fabric.
Probable Cause Indicates the iSNS Client service is enabled on multiple switches in the fabric.
Fabric OS Message Reference
53-1002448-01
Chapter
55
459