Spm-1001; Spm-1002; Spm-1003; Spm-1004 - Brocade Communications Systems SN3000B Reference

SPM System Messages

SPM-1001

Message
<timestamp>, [SPM-1001], <sequence-number>,, ERROR, <system-name>, Init fails:
<Reason>.
Probable Cause Indicates the SPM has failed to initialize.
Recommended Check the system resources and restart the switch.
Action
Severity ERROR

SPM-1002

Message
<timestamp>, [SPM-1002], <sequence-number>,, WARNING, <system-name>, Generic SPM
Warning: <Reason>.
Probable Cause Indiactes an SPM warning based on the reason displayed.
Recommended Run the supportsave command to gather information.
Action
Severity WARNING

SPM-1003

Message
<timestamp>, [SPM-1003], <sequence-number>,, INFO, <system-name>, Set New Group
Cfg SC Enable <SC_Enable> KV Type <KV_Type>.
Probable Cause Indicates a new group has been configured.
Recommended No action is required.
Action
Severity INFO

SPM-1004

Message
<timestamp>, [SPM-1004], <sequence-number>,, INFO, <system-name>, Initialize
Node.
Probable Cause Indicates a node initialization.
Fabric OS Message Reference
53-1002448-01
Chapter
98
661