Zone-1044; Zone-1045; Zone-1046; Zone-1047 - Brocade Communications Systems SN3000B Reference

115

ZONE-1044

ZONE-1044
Message
<timestamp>, [ZONE-1044], <sequence-number>,, INFO, <system-name>, The Default
Zone access mode is set to All Access.
Probable Cause Indicates that the Default Zone access mode is set to All Access.
Recommended Verify the event was planned. If the event was planned, no action is required. If the event was not
Action planned, take appropriate action as defined by your enterprise security policy.
Severity INFO

ZONE-1045

Message
<timestamp>, [ZONE-1045], <sequence-number>,, INFO, <system-name>, The Default
Zone access mode is already set to No Access.
Probable Cause Indicates that the Default Zone access mode is already set to No Access.
Recommended No action is required.
Action
Severity INFO

ZONE-1046

Message
<timestamp>, [ZONE-1046], <sequence-number>,, INFO, <system-name>, The Default
Zone access mode is already set to All Access.
Probable Cause Indicates that the Default Zone access mode is already set to All Access.
Recommended No action is required.
Action
Severity INFO

ZONE-1047

Message
<timestamp>, [ZONE-1047], <sequence-number>,, INFO, <system-name>, Switch domain
(<domainr>) does not support defined database.
Probable Cause Indicates that a remote Brocade switch is running a lower version of Fabric OS that does not
support the defined database.
Recommended Upgrade all the switches to the same firmware version.
Action
Severity INFO
764 Fabric OS Message Reference
53-1002448-01