Ficn-1023; Ficn-1024; Ficn-1025 - Brocade Communications Systems SN3000B Reference

38

FICN-1023

FICN-1023
Message
<timestamp>, [FICN-1023], <sequence-number>,, ERROR, <system-name>,
DevTapeEgr:FICON Selective Reset:Path=<VEPortNumber HostDomain HostPort
DeviceDomain> <DevicePort LPAR CUADDR DeviceAddr> Elapsed Time=<the current SIO
time in seconds for the device>.<the current SIO time in milliseconds for the
device> seconds.
Probable Cause Indicates that the FICON channel issued a Selective Reset sequence for a device.
Recommended If there was an unexpected job failure associated with this event, contact your switch service
Action provider.
Severity ERROR

FICN-1024

Message
<timestamp>, [FICN-1024], <sequence-number>,, ERROR, <system-name>,
DevTapeEgr:FICON Purge received Path=<VEPortNumber HostDomain HostPort
DeviceDomain> <DevicePort LPAR CUADDR DeviceAddr>.
Probable Cause Indicates that the FICON channel issued a Purge Path command sequence for a device.
Recommended If there was an unexpected job failure or IO Error associated with this event, contact your switch
Action service provider.
Severity ERROR

FICN-1025

Message
<timestamp>, [FICN-1025], <sequence-number>,, WARNING, <system-name>,
DevTapeIng:Auto Sense Data received on Path=0x<VEPortNumber HostDomain HostPort
DeviceDomain> <DevicePort LPAR CUADDR DeviceAddr> Bytes0-0xB=0x<bytes 0-3 of
sense data from the device><bytes 4-7 of sense data from the device><bytes 8-0x0b
of sense data from the device>.
Probable Cause Indicates that the FICON tape write pipelining processed the sense data from a FICON device.
Recommended If there was an unexpected job failure or IO Error associated with this event, contact your switch
Action service provider.
Severity WARNING
FICN-1026
Message
<timestamp>, [FICN-1026], <sequence-number>,, INFO, <system-name>,
DevTapeIng:UnusualStatus:WriteCancelSelr:Generating Final Ending Status
Path=<VEPortNumber HostDomain HostPort DeviceDomain> <DevicePort LPAR CUADDR
DeviceAddr>.
Probable Cause Indicates that the FICON tape write pipeline is completing an emulated Selective Reset sequence.
286 Fabric OS Message Reference
53-1002448-01