Fabr-1022; Fabr-1023; Fabr-1024 - Brocade Communications Systems SN3000B Reference

29

FABR-1022

FABR-1022
Message
<timestamp>, [FABR-1022], <sequence-number>, FFDC, CRITICAL, <system-name>,
Fabric size (<actual domains>) exceeds supported configuration (<supported
domains>). Fabric limit timer (<type>) started from <grace period in seconds>.
Probable Cause Indicates that the fabric size has exceeded the value-line limit, and the grace period counter has
started. If the grace period is complete and the size of the fabric is still outside the specified limit,
Web Tools is disabled.
Recommended Bring the fabric size within the licensed limits. Either a full fabric license must be added or the size
Action of the fabric must be changed to within the licensed limit. Contact your switch provider to obtain a
full fabric license.
Severity CRITICAL

FABR-1023

Message
<timestamp>, [FABR-1023], <sequence-number>,, INFO, <system-name>, Fabric size is
within supported configuration (<supporteddomains>). Fabric limit timer (<type>)
stopped at <grace period in seconds>.
Probable Cause Indicates that the fabric size is within specified limits. Either a full fabric license was added or the
size of the fabric was changed to within the licensed limit.
Recommended No action is required.
Action
Severity INFO

FABR-1024

Message
<timestamp>, [FABR-1024], <sequence-number>,, INFO, <system-name>, Initializing
fabric size limit timer <grace period>
Probable Cause Indicates that the fabric size has exceeded the limit set by your value-line switches. Value-line
switches have a limited fabric size, i.e., a specified limit to the number of domains. This value is
defined by your specific value-line license key. The fabric size has exceeded this specified limit. The
grace-period timer has been initialized. If the grace period is complete and the size of the fabric is
still outside the specified limit, Web Tools is disabled.
Recommended Bring the fabric size within the licensed limits. Either a full fabric license must be added or the size
Action of the fabric must be changed to within the licensed limit. Contact your switch provider to obtain a
full fabric license.
Severity INFO
216 Fabric OS Message Reference
53-1002448-01