Bl-1035; Bl-1036; Bl-1037; Bl-1038 - Brocade Communications Systems SN3000B Reference

7

BL-1035

Recommended No action is required.
Action
Severity INFO
BL-1035
Message
<timestamp>, [BL-1035], <sequence-number>,, INFO, <system-name>, Slot <slot
number> iSCSI port <iscsi port number> Initialization completed.
Probable Cause Indicates that the slot has completed initializing the specified iSCSI port.
Recommended No action is required.
Action
Severity INFO

BL-1036

Message
<timestamp>, [BL-1036], <sequence-number>,, CRITICAL, <system-name>, Faulting 8G
blade in slot = <slot number> due to incompatible stag mode. All EX/VEX ports must
be disabled in order to enable the 8G blade in the chassis.
Probable Cause Indicates that the FOS 6.0, 8G blade with legacy mode (EX_port having stag) will be disabled.
Recommended Disable all EX/VEX ports and perform a slotpoweroff or slotpoweron operation on the 8G blade.
Action Also, all EX/VEX ports can be re-enabled now.
Severity CRITICAL

BL-1037

Message
<timestamp>, [BL-1037], <sequence-number>,, CRITICAL, <system-name>, Faulting
chip in slot = <slot number>, miniS = <miniS number>, port = <port number> due to
BE/BI port fault.
Probable Cause Indicates a fault on the chip and that all ports on the chip have been disabled.
Recommended No action is required.
Action
Severity CRITICAL

BL-1038

Message
<timestamp>, [BL-1038], <sequence-number>,, CRITICAL, <system-name>, Inconsistent
FPGA image version detected, please reboot the switch for recovery.
Probable Cause Indicates that the FPGA image version is incompatible with the software version.
82 Fabric OS Message Reference
53-1002448-01