Cvlm-1001; Cvlm-1002; Cvlm-1003; Cvlm System Messages - Brocade Communications Systems SN3000B Reference

CVLM System Messages

CVLM-1001

Message
<timestamp>, [CVLM-1001], <sequence-number>,, ERROR, <system-name>, Failed to
allocate memory: (<function name>).
Probable Cause Indicates that the specified function has failed to allocate memory.
Recommended Check the memory usage on the switch using the memShow command. Restart or power cycle the
Action switch.
Severity ERROR

CVLM-1002

Message
<timestamp>, [CVLM-1002], <sequence-number>,, ERROR, <system-name>, Failed to
initialize <module> rc = <error>.
Probable Cause Indicates that an initialization of a module within the CVLMD has failed.
Recommended Download a new firmware version using the firmwareDownload command. Refer to the Fabric OS
Action Command Reference Manual for more information on this command.
Severity ERROR

CVLM-1003

Message
<timestamp>, [CVLM-1003], <sequence-number>,, INFO, <system-name>, Crypto device
configuration has been committed by switch (<Switch WWN>).
Probable Cause Indicates that the switch has committed a crypto device configuration.
Recommended No action is required.
Action
Severity INFO
Fabric OS Message Reference
53-1002448-01
Chapter
22
163