Ssmd-1008; Ssmd-1200; Ssmd-1201 - Brocade Communications Systems SN3000B Reference

Recommended Try again after sometime. If the problem persists, execute the supportSave command and then
Action restart or power cycle the switch.
Severity ERROR

SSMD-1008

Message
<timestamp>, [SSMD-1008], <sequence-number>,, ERROR, <system-name>, Apptype TCAM
Table full for Slot:<slot number> chip:<Chip number in the slot>.
Probable Cause Indicates that the application type TCAM table is full on the specified chip.
Recommended Remove the unused protocol-based VLAN classifiers and Layer 2 Extended access control lists
Action (ACLs).
Severity ERROR

SSMD-1200

Message
<timestamp>, [SSMD-1200], <sequence-number>,, WARNING, <system-name>, QoS failed
programming ASIC <ASIC slot number>/<ASIC chip number> Multicast Rate Limit.
Probable Cause Indicates that DCE SSM encountered an unexpected error in programming the dataplane
application-specific integrated circuit (ASIC) for the enforcing Multicast Rate Limit feature.
Recommended Delete and reapply Quality of Service (QoS) Multicast Rate Limit policy using the qos rcv-queue
Action multicast rate-limit command.
If the problem persists, restart or power cycle the switch.
Severity WARNING

SSMD-1201

Message
<timestamp>, [SSMD-1201], <sequence-number>,, WARNING, <system-name>, QoS failed
programming ASIC <ASIC slot number>/<ASIC chip number> Multicast Tail Drop.
Probable Cause Indicates that DCE SSM encountered an unexpected error in programming the dataplane ASIC for
the enforcing Multicast Tail Drop feature.
Recommended Delete and reapply QoS Multicast Tail Drop policy using the qos rcv-queue multicast threshold
Action command.
If the problem persists, restart or power cycle the switch.
Severity WARNING
Fabric OS Message Reference
53-1002448-01
100
SSMD-1008
679