Sflo-1005; Sflo-1006; Sflo-1007; Sflo-1008 - Brocade Communications Systems SN3000B Reference

95

SFLO-1005

Recommended No action is required.
Action
Severity INFO
SFLO-1005
Message
<timestamp>, [SFLO-1005], <sequence-number>,, INFO, <system-name>, sFlow sampling
rate on port <name> is changed to <sample_rate>.
Probable Cause Indicates that the sFlow sampling rate has been changed on the specified port.
Recommended No action is required.
Action
Severity INFO

SFLO-1006

Message
<timestamp>, [SFLO-1006], <sequence-number>,, INFO, <system-name>, sFlow polling
interval on port <name> is changed to <poling_intvl>.
Probable Cause Indicates that the polling interval has been changed on the specified port.
Recommended No action is required.
Action
Severity INFO

SFLO-1007

Message
<timestamp>, [SFLO-1007], <sequence-number>,, INFO, <system-name>, <name> is as
<state> as sFlow collector.
Probable Cause Indicates that the sFlow collector is configured or not configured.
Recommended No action is required.
Action
Severity INFO

SFLO-1008

Message
<timestamp>, [SFLO-1008], <sequence-number>,, INFO, <system-name>, All the sFlow
collectors are unconfigured.
Probable Cause Indicates that none of the sFlow collectors are configured.
642 Fabric OS Message Reference
53-1002448-01