Rpcd-1001; Rpcd-1002; Rpcd-1003; Rpcd System Messages - Brocade Communications Systems SN3000B Reference

RPCD System Messages

RPCD-1001

Message
<timestamp>, [RPCD-1001], <sequence-number>,, WARNING, <system-name>,
Authentication Error: client \"<IP address>\" has bad credentials: <bad user name
and password pair>
Probable Cause Indicates an authentication error was reported. The specified client IP address has faulty
credentials.
Recommended Enter the correct user name and password from the Fabric Access API host.
Action
Severity WARNING

RPCD-1002

Message
<timestamp>, [RPCD-1002], <sequence-number>,, WARNING, <system-name>, Missing
certificate file. Secure RPCd is disabled.
Probable Cause Indicates an SSL certificate is missing.
Recommended To enable RPCD in secure mode, install a valid SSL certificate on the switch.
Action
Severity WARNING

RPCD-1003

Message
<timestamp>, [RPCD-1003], <sequence-number>,, WARNING, <system-name>, Permission
denied accessing certificate file. Secure RPCd is disabled.
Probable Cause Indicates the SSL certificate file configured on the switch could not be accessed because the root
did not have read-level access.
Recommended Change the file system access level for the certificate to root read-level access.
Action
Severity WARNING
Fabric OS Message Reference
53-1002448-01
Chapter
90
571