Fw-1172; Fw-1173; Fw-1174 - Brocade Communications Systems SN3000B Reference

45

FW-1172

FW-1172
Message
<timestamp>, [FW-1172], <sequence-number>,, INFO, <system-name>, <Port Name>,
<Label>, value has changed(High=<High value>, Low=<Low value>). Current value is
<Value> <Unit>.
Probable Cause Indicates that the number of protocol errors that the port experiences has changed. Occasional
protocol errors occur due to software glitches. Persistent protocol errors occur due to hardware
problems.
Recommended Check both ends of your cable connection. Verify that the cable and small form-factor pluggable
Action (SFP) are not faulty.
Severity INFO

FW-1173

Message
<timestamp>, [FW-1173], <sequence-number>,, INFO, <system-name>, <Port Name>,
<Label>, is below low boundary(High=<High value>, Low=<Low value>). Current value
is <Value> <Unit>.
Probable Cause Indicates that the number of protocol errors that the port experiences has fallen below the low
boundary. Occasional protocol errors occur due to software glitches. Persistent protocol errors
occur due to hardware problems. A low number of protocol errors means that the switch is
functioning normally.
Recommended No action is required. Respond to this message as is appropriate to the particular policy of the
Action end-user installation.
Severity INFO

FW-1174

Message
<timestamp>, [FW-1174], <sequence-number>,, WARNING, <system-name>, <Port Name>,
<Label>, is above high boundary(High=<High value>, Low=<Low value>). Current value
is <Value> <Unit>.
Probable Cause Indicates that the number of protocol errors that the port experiences has risen above the high
boundary. Occasional protocol errors occur due to software glitches. Persistent protocol errors
occur due to hardware problems.
Recommended Check both ends of your connection. Verify that your cable and small form-factor pluggable (SFP)
Action are not faulty.
Severity WARNING
364 Fabric OS Message Reference
53-1002448-01