Pdm-1008; Pdm-1009; Pdm-1010 - Brocade Communications Systems SN3000B Reference

Recommended Run the firmwareDownload command to reinstall the firmware.
Action
If the message persists, run the supportFtp command (as needed) to set up automatic FTP
transfers; then run the supportSave command and contact your switch service provider.
Severity WARNING

PDM-1008

Message
<timestamp>, [PDM-1008], <sequence-number>,, WARNING, <system-name>, Failed to
get the number of U_Ports.
Probable Cause Indicates the parity data manager (PDM) system call to getCfg failed.
Recommended Run the firmwareDownload command to reinstall the firmware.
Action
If the message persists, run the supportFtp command (as needed) to set up automatic FTP
transfers; then run the supportSave command and contact your switch service provider.
Severity WARNING

PDM-1009

Message
<timestamp>, [PDM-1009], <sequence-number>,, WARNING, <system-name>, Can't update
Port Config Data.
Probable Cause Indicates the parity data manager (PDM) system call to setCfg failed.
Recommended Run the firmwareDownload command to reinstall the firmware.
Action
If the message persists, run the supportFtp command (as needed) to set up automatic FTP
transfers; then run the supportSave command and contact your switch service provider.
Severity WARNING

PDM-1010

Message
<timestamp>, [PDM-1010], <sequence-number>,, WARNING, <system-name>, File open
failed: <file name>, errno= <errno>.
Probable Cause Indicates the parity data manager (PDM) process could not open the specified file.
Recommended Run the firmwareDownload command to reinstall the firmware.
Action
If the message persists, run the supportFtp command (as needed) to set up automatic FTP
transfers; then run the supportSave command and contact your switch service provider.
Severity WARNING
Fabric OS Message Reference
53-1002448-01
79
PDM-1008
535