Fw-1438; Fw-1439; Fw-1440; Fw-1441 - Brocade Communications Systems SN3000B Reference

FW-1438

Message
<timestamp>, [FW-1438], <sequence-number>,, WARNING, <system-name>, Switch status
change contributing factor Missing SFPs: <Number of missing SFPs> missing out of
<Total number of SFPs> SFPs:config(<Percentage configured> percent,<Actual
threshold limit>). (Port(s) <port list>).
Probable Cause Indicates that the switch status is not in a healthy state. This occurred because the number of
missing small form-factor pluggables (SFPs) is greater than or equal to the policy set by the
switchStatusPolicySet command.
Recommended Execute the switchStatusPolicySet command to modify the SFP policy or to add SFPs to the empty
Action ports.
Severity WARNING

FW-1439

Message
<timestamp>, [FW-1439], <sequence-number>,, WARNING, <system-name>, Switch status
change contributing factor Switch offline.
Probable Cause Indicates that the switch status is not in a healthy state. This occurred because the switch is
offline.
Recommended Execute the switchEnable command.
Action
Severity WARNING

FW-1440

Message
<timestamp>, [FW-1440], <sequence-number>,, INFO, <system-name>, <FRU label>
state has changed to <FRU state>.
Probable Cause Indicates that the state of the specified field-replaceable unit (FRU) has changed to absent.
Recommended Verify that the event was planned.
Action
Severity INFO

FW-1441

Message
<timestamp>, [FW-1441], <sequence-number>,, INFO, <system-name>, <FRU label>
state has changed to <FRU state>.
Probable Cause Indicates that the state of the specified field-replaceable unit (FRU) has changed to inserted. This
means that an FRU is inserted but not powered on.
Fabric OS Message Reference
53-1002448-01
45
FW-1438
403