Fw-1512; Fw-1513; Fw-1514 - Brocade Communications Systems SN3000B Reference

45

FW-1512

FW-1512
Message
<timestamp>, [FW-1512], <sequence-number>,, INFO, <system-name>, <Port Name>,
<Label>, has dropped below upper threshold boundary to in between(High=<High
value>, Low=<Low value>). Current value is <Value> <Unit>.
Probable Cause Indicates that the number of link failures that the port experiences has changed and dropped
below upper threshold boundary to a value within the acceptable range. Link loss errors occur
when a link experiences a loss of signal and fails. Both physical and hardware problems can cause
link loss errors. Link loss errors frequently occur due to a loss of synchronization. Check for
concurrent loss of synchronization errors and, if applicable, troubleshoot them.
Recommended No action is required. Respond to this message as is appropriate to the particular policy of the
Action end-user installation.
Severity INFO

FW-1513

Message
<timestamp>, [FW-1513], <sequence-number>,, INFO, <system-name>, <Port Name>,
<Label>, has crossed lower threshold boundary threshold boundary to in
between(High=<High value>, Low=<Low value>). Current value is <Value> <Unit>.
Probable Cause Indicates that the number of synchronization losses that the port experiences has changed and
crossed lower threshold boundary to a value within the acceptable range. Loss of synchronization
errors frequently occur due to a faulty small form-factor pluggable (SFP) or cable. Signal losses
often create synchronization losses.
Recommended No action is required. Respond to this message as is appropriate to the particular policy of the
Action end-user installation.
Severity INFO

FW-1514

Message
<timestamp>, [FW-1514], <sequence-number>,, INFO, <system-name>, <Port Name>,
<Label>, has dropped below upper threshold boundary to in between(High=<High
value>, Low=<Low value>). Current value is <Value> <Unit>.
Probable Cause Indicates that the number of synchronization losses that the port experiences has changed and
dropped below upper threshold boundary to a value within the acceptable range. Loss of
synchronization errors frequently occur due to a faulty small form-factor pluggable (SFP) or cable.
Signal losses often create synchronization losses.
Recommended No action is required. Respond to this message as is appropriate to the particular policy of the
Action end-user installation.
Severity INFO
408 Fabric OS Message Reference
53-1002448-01