Sec-1158; Sec-1159; Sec-1160; Sec-1163 - Brocade Communications Systems SN3000B Reference

SEC-1158

Message
<timestamp>, [SEC-1158], <sequence-number>,, INFO, <system-name>, Invalid name
<Policy or Switch name>.
Probable Cause Indicates the specified name is invalid. The name can be a policy name or a switch name.
Recommended Enter a valid name.
Action
Severity INFO

SEC-1159

Message
<timestamp>, [SEC-1159], <sequence-number>,, INFO, <system-name>, Non_Reachable
domain <Domain ID>.
Probable Cause Indicates there has been a corruption during the distribution of the security database. This can only
occur when the primary fabric configuration server (FCS) is distributing the security database to the
other switches in the fabric and local validation finds that there is an error in the security database.
This is a rare occurrence.
Recommended Run the secFabricShow command to verify that the fabric is still consistent. All the switches should
Action be in the ready state. If a switch is in the error state, the database might not be correctly updated
for that specific switch.
Severity INFO

SEC-1160

Message
<timestamp>, [SEC-1160], <sequence-number>,, INFO, <system-name>, Duplicate port
<port ID> in port list (<port list>).
Probable Cause Indicates a duplicate port member exists in the specified port list.
Recommended Verify that there is no duplicate member in the port list.
Action
Severity INFO

SEC-1163

Message
<timestamp>, [SEC-1163], <sequence-number>,, ERROR, <system-name>, System is
already in secure mode. Lockdown option cannot be applied.
Probable Cause Indicates the lockdown option was attempted while the fabric is already in secure mode.
Fabric OS Message Reference
53-1002448-01
94
SEC-1158
613