Cisco MDS 9124 - Fabric Switch Reference page 283

Chapter 4 C Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Before using the no crypto ca trustpoint command to remove the trust point, first delete the identity
Note
certificate and CA certificate (or certificate chain) and then disassociated the RSA key pair from the trust
point. The switch enforces this behavior to prevent the accidental removal of the trust point along with
the certificates.
Examples
The following example declares a trust point CA that the switch should trust and enters trust point
configuration submode.
switch# config terminal
switch(config)# crypto ca trustpoint admin-ca
switch(config-trustpoint)#
The following example removes the trust point CA.
switch# config terminal
switch(config)#
Related Commands Command
crypto ca authenticate Authenticates the certificate of the certificate authority.
crypto ca enroll
show crypto ca
certificates
show crypto ca
trustpoints
OL-16217-01, Cisco MDS SAN-OS Release 3.x
no crypto ca trustpoint admin-ca
Description
Generates a certificate signing request for a trust point.
Displays the identity and CA certificate details.
Displays trust point configurations.
Cisco MDS 9000 Family Command Reference
crypto ca trustpoint
4-129