Destination-Profile - Cisco MDS 9124 - Fabric Switch Reference

destination-profile

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
destination-profile
To configure the customer ID with the Call Home function, use the destination-profile command in Call
Home configuration submode. To disable this feature, use the no form of the command.
Syntax Description profile-name
full-txt-destination
short-txt-destination
xml-destination
alert-group
all
avanti
cisco-tac
environmental
inventory
license
linecard-hardware
rmon
supervisor-hardware
syslog-port-group
system
test
Defaults
None.
Command Modes Call Home configuration submode.
Command History Release
1.0(2)
Cisco MDS 9000 Family Command Reference
5-16
destination-profile {profile-name | full-txt-destination | short-txt-destination | xml-destination}
{alert-group {all | avanti | cisco-tac | environmental | inventory | license |
linecard-hardware | rmon | supervisor-hardware | syslog-group-port | system | test}
no destination-profile {profile-name | full-txt-destination | short-txt-destination |
xml-destination} {alert-group {all | avanti | cisco-tac | environmental | inventory | license |
linecard-hardware | rmon | supervisor-hardware | syslog-group-port | system | test}
Specifies a user-defined user profile with a maximum of 32 alphanumeric
characters.
Configures destination profile for plain text message.
(Optional) Configures a destination for a short text message.
(Optional) Configures destination profile for XML message.
Specifies one or more of the alert groups
Specifies an alert group consisting of all Call Home messages.
Specifies an alert group consisting of events that are meant only for Avanti.
Specifies an alert group consisting of events that are meant only for Cisco
TAC.
Specifies an alert group consisting of power, fan, temperature-related events.
Specifies an alert group consisting of inventory status events.
Specifies an alert group consisting of license status events.
Specifies an alert group consisting of module-related events.
Specifies an alert group consisting of RMON status events.
Specifies an alert group consisting of supervisor related events.
Specifies an alert group consisting of syslog port group status events.
Specifies an alert group consisting of software related events.
Specifies an alert group consisting of user-generated test events.
Modification
This command was introduced.
Chapter 5 D Commands
OL-16217-01, Cisco MDS SAN-OS Release 3.x