Browse Pim Ip Multicast Route Table; Browse Pim Rp-Set Table; Ospf Monitor; Browse Ospf Lsdb Table - D-Link DGS-3600 Series User Manual

Browse PIM IP Multicast Route Table

The PIM IP Multicast Route Table is used to view information regarding the multicast data route entries in the Switch.
To view this window, click Monitoring > PIM Monitor > Browse PIM IP Mutlicast Route Table, as shown below.

Browse PIM RP-Set Table

The following window is used to assess information regarding the Rendezvous Point (RP) Set on the Switch.
To view this window, click Monitoring > PIM Monitor > Browse PIM RP-Set Table, as shown below.

OSPF Monitor

This section offers windows regarding OSPF (Open Shortest Path First) information on the Switch, including the OSPF LSDB
Table, OSPF Neighbor Table and the OSPF Virtual Neighbor Table. To view these tables, click Monitoring > OSPF
Monitor.

Browse OSPF LSDB Table

The OSPF LSDB Table displays the current link-state database in use by the OSPF routing protocol on a per-OSPF area basis.
To view this table, click Monitoring > OSPF Monitor > Browse OSPF LSDB Table, as shown below.
®
xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch
Figure 12- 43. PIM Neighbor Address Table window
Figure 12- 44. PIM IP Multicast Route Table window
Figure 12- 45. PIM RP Set Table window
368