xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch User Manual
PIM Monitoring
Multicast routers use Protocol Independent Multicast (PIM) to determine which other multicast routers should receive
multicast packets. To find out more information concerning PIM and its configuration on the Switch, see the IP Multicast
Routing Protocol chapter of Section 6, Configuration.
Browse PIM Neighbor Table
The PIM Neighbor Table contains information regarding each of a router's PIM neighbors. This screen may be found by
clicking Monitoring > PIM Monitor > Browse PIM Neighbor Table. To search this table, enter either an Interface
Name or Neighbor Address into the respective field and click the Find button. PIM neighbors of that entry will appear in
the PIM Neighbor Table below.
Figure 9- 36. PIM Neighbor Table
PIM IP MRoute Table
The PIM IP MRoute Table is used to view information regarding the multicast data route entries in the Switch. This screen
may be found by clicking Monitoring > Layer 3 Feature > PIM Monitor > Browse PIM IP MRoute Table.
Figure 9- 37. PIM IP MRoute Table
290