Pppoe Circuit Id Insertion Commands; Config Pppoe Circuit_Id_Insertion State - D-Link DGS-1100-06/ME Cli Reference Manual

Metro ethernet managed switch
Hide thumbs Also See for DGS-1100-06/ME:
Table of Contents

Advertisement

PPPOE CIRCUIT ID INSERTION COMMANDS

PPPoE Circuit ID Insertion is used to produce the unique subscriber mapping capability that is possible
on ATM networks between ATM-DSL local loop and the PPPoE server. The PPPoE server will use the
inserted Circuit Identifier sub-tag of the received packet to provide AAA services (Authentication,
Authorization and Accounting). Through this method, Ethernet networks can be as the alternative of the
ATM networks.
The PPPoE Circuit ID Insertion commands in the Command Line Interface (CLI) are listed (along with the
appropriate parameters) in the following table.
Command
config pppoe circuit_id
_insertion state
config pppoe
circuit_id_insertion
ports
show pppoe
circuit_id_insertion
show pppoe
circuit_id_insertion
ports
Each command is listed in detail, as follows:

config pppoe circuit_id_insertion state

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To globally enable PPPoE circuit identifier insertion:
DGS-1100-06/ME:5#config pppoe circuit_id_insertion state enable
Command: config pppoe circuit_id_insertion state enable
DGS-1100-06/ME Metro Ethernet Managed Switch CLI Reference Guide
Parameter
[enable | disable]
<portlist> [ circuit_id [ mac | ip | udf <string 32> ] | state [enable | disable ] ]
{<portlist>}
Used to enable or disable the PPPoE circuit identifier insertion.
config pppoe circuit_id_insertion state [enable | disable]
When PPPoE circuit identifier insertion is enabled, the system will
insert the circuit ID tag to the received PPPoE discover and request
packet if the tag is absent, and remove the circuit ID tag from the
received PPPoE offer and session confirmation packet.
The inserted circuit ID contains the following information:
Client MAC address
Device ID
Port number
By default, the Switch IP address is used as the device ID to encode
the circuit ID option.
[enable | disable] – Enables or disable PPPoE circuit ID insertion
globally. The function is disabled by default.
Only administrator or operate-level users can issue this command.
37
8

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents