Management > Snmp > Snmp Engine Id Local Settings; Management > Snmp > Snmp User Table Settings - D-Link DXS-1210-10TS User Manual

SNMPv2c - SNMPv2 supports both centralized and distributed network management strategies. It
includes improvements in the Structure of Management Information (SMI) and adds some security
features.
SNMPv3 - SNMPv3 provides secure access to devices through a combination of authentication and
encryption.
Security Level: This function is only available when you select SNMPv3 security level.
NoAuthNoPriv - No authorization and no encryption for packets sent between the Switch and SNMP
manager.
AuthNoPriv - Authorization is required, but no encryption for packets sent between the Switch and
SNMP manager.
AuthPriv – Both authorization and encryption are required for packets sent between the Switch and
SNMP manger.
IP Address-List Name:
Read View Name: Enter a SNMP group name for users that are allowed SNMP read privileges to the
Switch's SNMP agent.
Write View Name: Enter a SNMP group name for users that are allowed SNMP write privileges to the
Switch's SNMP agent.
Notify View Name: Enter a SNMP group name for users that can receive SNMP trap messages generated
by the Switch's SNMP agent.
Click the Add button to add a new entry based on the information entered.
Click the Delete button to remove the specified entry.
Management > SNMP > SNMP Engine ID Local Settings
The Engine ID is a unique identifier used to identify the SNMPv3 engine on the Switch.
Input the Engine ID then click Apply to apply the changes or click Default to change back to the default
value.
Management > SNMP > SNMP User Table Settings
The SNMP User Table Settings page allows you to manage the SNMP users that can access the Switch. It
allows you to set the Group, SNMP version, and authentication and encryption type for a user.
Figure 4.47 – Management > SNMP > SNMP Engine ID Local Settings
Figure 4.48 – Management > SNMP > SNMP User Table Settings
D-Link DXS-1210 Series User Manual
32