Table of Contents
Advertisement
DGS-1510 Series Gigabit Ethernet SmartPro Switch CLI Reference Guide
37. IP-MAC-Port Binding (IMPB) Commands
37-1
clear ip ip-mac-port-binding violation
This command is used to clear IP-MAC-Port Binding (IMPB) blocked entries.
clear ip ip-mac-port-binding violation {all | interface INTERFACE-ID | MAC-ADDRESS}
Parameters
all
interface INTERFACE-ID
MAC-ADDRESS
Default
None.
Command Mode
Privileged EXEC Mode.
Command Default Level
Level: 12.
Usage Guideline
Use the command to delete the IMPB violation entry from the filtering database.
Example
This example shows how to clear the entry blocked on interface eth1/0/4.
Switch# clear ip ip-mac-port-binding violation interface eth1/0/4
Switch#
37-2
ip ip-mac-port-binding
This command is used to enable the IMPB access control for port interfaces. Use the no form of this
command to disable the IMPB access control function.
ip ip-mac-port-binding [MODE]
no ip ip-mac-port-binding
Parameters
MODE
Default
By default, this option is disabled.
Specifies to clear all of the violation entries.
Specifies to clear the violation entries created by the specified
interface.
Specifies to clear the violation entries of the specified MAC address.
(Optional) Specifies the IMPB access control mode.
strict-mode: Specifies to perform strict mode access control.
loose-mode: Specifies to perform loose mode access control.
If the mode option is not specified, the strict-mode is used.
332
Advertisement
Table of Contents
