Ip-Mac Binding Port - D-Link xStack DGS-3600 User Manual

xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch

IP-MAC Binding Port

To enable or disable IP-MAC binding on specific ports, click
IP-MAC Binding Port in the IP-MAC Binding folder on the
Administration Menu to open the IP-MAC Binding Ports
Setting window. Select a port or a range of ports with the
From and To fields. Enable or disable the port with the State
field. The user may also enable the ACL Mode for IP-MAC
Binding which will create two Access Profile Entries on the
Switch, as previously stated. Click Apply to save changes.
Figure 6- 42. IP-MAC Binding Ports window
58