Dns Name Server Settings - D-Link DXS-3600 Series Reference Manual

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
The fields that can be configured in DNS Global Settings are described below:
Parameter
IP DNS Lookup Static State
IP DNS Lookup Cache State
IP Domain Lookup
IP Name Server Timeout
IP DNS Server
Click the Apply button to accept the changes made.

DNS Name Server Settings

This window is used to view and configure the IP address of a domain name server.
To view the following window, click Management > DNS > DNS Name Server Settings, as shown below:
The fields that can be configured in DNS Name Server Settings are described below:
Parameter
VRF Name
Name Server IPv4
Name Server IPv6
Click the Apply button to accept the changes made.
Click the Find button to locate a specific entry based on the information entered.
Click the Delete button to remove the specified entry.
Figure 4-54 DNS Global Settings Window
Description
Select to enable or disable the IP DNS lookup static state here.
Select to enable or disable the IP DNS lookup cache state here.
Select to enable or disable the IP domain lookup state here.
Enter the maximum time to wait for a response from a specified name
server. This value is between 1 and 60 seconds.
Select the globally enable or disable the DNS server feature here.
Figure 4-55 DNS Name Server Settings Window
Description
Enter the VRF instance's name that will be used in this configuration or
search here. This name can be up to 12 characters long.
Select and enter the IPv4 address of the DNS server.
Select and enter the IPv6 address of the DNS server.
69