Domain Name Server (Dns) Resolver Commands - D-Link xStack DGS-3400 Series Reference Manual

xStack
The Domain Name Server (DNS) Resolver commands in the Command Line Interface (CLI) are listed (along with the
appropriate parameters) in the following table.
Command
config name_server
show name_server
create host_name
delete host_name
show host_name
enable dns_resolver
disable dns_resolver
Each command is listed, in detail, in the following sections.
config name_server
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To add DNS Resolver primary name server 10.10.10.10:
®
DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch CLI Manual
D N
OMAIN AME
Parameters
[[add |delete ] <ipaddr> {primary} | timeout <second 1-60>]
<name 255> <ipaddr>
[<name 255> | all]
{static | dynamic}
Used to configure the DNS Resolver name server of the switch.
config name_server [[add |delete ] <ipaddr> {primary} | timeout <second 1-60>]
The config name_server command is used to configure the DNS Resolver name server of the
switch. Note that only when add a name server, the parameter "primary" will be resolved.
Other conditions won't resolve the parameter "primary". It means that when delete a name
server, just check the IP address. If the IP address is the same to the name server's, the
name server will be deleted, don't check the priority parameter.
When adding a name server, if one primary name server exists in the static name server
table, then add a new primary name server, the existing primary name server will be changed
to a normal name server. If the added primary name server's IP address is the same to an
existed normal name server's IP address, the existing normal name server will be changed to
a primary name server, but won't add new name server. When no primary name server is
specified, the first configured name server will auto change to primary name server.. If the
deleted name server's IP address equals to one of the existing name servers' IP addresses,
regardless whether a normal name server or primary name server, the name server will be
deleted.
add - Add DNS Resolver name server
delete - Delete DNS Resolver name server
ipaddr - The DNS Resolver name server IP address
timeout - The maximum time waiting for a responce from a specified name server.
primary - Specify the name server is a primary name server.
Only Administrator and Operator-level users can issue this command.
S (DNS) R
ERVER
222
29
C
ESOLVER OMMANDS