Juniper JUNOS OS 10.3 - SOFTWARE Manual page 3944

Complete Software Guide for Junos
Required Privilege
Level
List of Sample Output
Output Fields
traceroute traceroute
3848
®
OS for EX Series Ethernet Switches, Release 10.3
command. You can only analyze IPv4 point-to-point LSPs. IPv6
mpls rsvp lsp-name
is not supported.
no-resolve —(Optional) Do not attempt to determine the hostname that corresponds to
the IP address.
routing-instance routing-instance-name
traceroute attempt.
source source-address —(Optional) Source address of the outgoing traceroute packets.
—(Optional) Value to include in the IP type-of-service (ToS) field. The range of
tos value
values is 0 through 255
—(Optional) Maximum time-to-live value to include in the traceroute request.
ttl value
The range of values is
wait seconds —(Optional) Maximum time to wait for a response to the traceroute request.
network
traceroute on page 3848
traceroute as-number-lookup host on page 3849
traceroute noresolve on page 3849
traceroute (Between CE Routers, Layer 3 VPN) on page 3849
traceroute (Through an MPLS LSP) on page 3849
Table 511 on page 3848 describes the output fields for the
fields are listed in the approximate order in which they appear.
Table 511: traceroute Output Fields
Field Name
traceroute to
hops max
byte packets
number-of-hops
router-name
address
Round trip time
user@host> traceroute santacruz
traceroute to green.company.net (10.156.169.254), 30 hops max, 40 byte packets
1 blue23 (10.168.1.254)
—(Optional) Name of the routing instance for the
.
through .
0 128
Field Description
IP address of the receiver.
Maximum number of hops allowed.
Size of packets being sent.
Number of hops from the source to the named router or switch.
Name of the router or switch for this hop.
Address of the router or switch for this hop.
Average round-trip time, in milliseconds (ms).
2.370 ms 2.853 ms
command. Output
traceroute
0.367 ms
Copyright © 2010, Juniper Networks, Inc.