Configuring Firewall Authentication (Nsm Procedure) - Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING J SERIES SERVICES ROUTERS AND SRX SERIES SERVICES GATEWAYS GUIDE REV Manual

Configuring J Series Services Routers and SRX Series Services Gateways Guide

Configuring Firewall Authentication (NSM Procedure)

Table 72: Firewall Authentication Configuration Details
Option Function
Name Specifies the trace flag name.
Comment Supplies a descriptive comment for the trace flag.
None Specifies that the flag options does not belong to any of the
other options type such as terse, detail, or extensive.
Terse Specifies brief traceoptions information.
Detail Specifies detailed traceoptions information.
Extensive Specifies extensive traceoptions information.
Related
Documentation
124
To configure firewall authentication feature:
In the NSM navigation tree, select Device Manager > Devices.
1.
Click the Device Tree tab, and then double-click the device for which you want to
2.
configure the firewall authentication feature.
Click the Configuration tab. In the configuration tree, select Security > Firewall
3.
Authentication.
Enter a comment in the Firewall Authentication workspace that describes the firewall
4.
authentication.
In the configuration tree, select Security > Firewall Authentication > Traceoptions.
5.
Enter a comment in the Traceoptions workspace that describes the traceoptions.
6.
In the configuration tree, select Security > Firewall Authentication > Traceoptions
7.
> Flag.
Add or modify settings as specified in Table 72 on page 124.
8.
Click one:
9.
OK—Saves the changes.
Cancel—Cancels the modifications.
Apply—Applies the traceoptions settings.
Configuring Certificates (NSM Procedure) on page 121
Configuring a Flow (NSM Procedure) on page 125
Configuring the Forwarding Options (NSM Procedure) on page 131
Your Action
Select a flag name from the list.
(Optional) Enter a comment.
Select the option.
Select the option.
Select the option.
Select the option.
Copyright © 2010, Juniper Networks, Inc.