Configuring Authentication Realms; Configuring Secure Access Authentication Realms (Nsm Procedure) - Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING SECURE ACCESS DEVICES GUIDE REV 01 Manual

CHAPTER 12

Configuring Authentication Realms

Configuring Secure Access Authentication Realms (NSM Procedure)

Copyright © 2010, Juniper Networks, Inc.
Configuring Secure Access Authentication Realms (NSM Procedure) on page 195
Configuring Secure Access Authentication Policies (NSM Procedure) on page 198
Configuring Secure Access Role Mapping Rules (NSM Procedure) on page 203
An authentication realm specifies the conditions that users must meet to sign into the
Secure Access device.
To configure an authentication realm:
In the NSM navigation tree, select Device Manager > Devices. Click the Device Tree
1.
tab, and then double-click the Secure Access device for which you want to configure
authentication realms.
Click the Configuration tab, select Administrators > Admin Realms or Users > User
2.
Realms. The corresponding workspace appears.
Click the New button. The New dialog box appears.
3.
Configure the server using the settings described in Table 51 on page 195.
4.
Click one:
5.
OK—Saves the changes.
Cancel—Cancels the modifications.
Table 51: Secure Access Authentication Realms Configuration Details
Option Function
General tab
Realm Name Specifies the name of the realm.
Description Describes the realm.
When editing, start Specifies that the Role Mapping tab
on the Role is selected when you open the
Mapping page realm for editing.
Your Action
Enter a name.
Enter a description.
Select General > When editing, start
on the Role Mapping page to enable
this option.
195