Adding A Namespace (Ezconfig); Enabling Interfaces (Ezconfig); Restarting Services (Ezconfig) - Juniper MEDIA FLOW CONTROLLER 2.0.4 - ADMINISTRATOR S GUIDE AND CLI Administrator's Manual

Media Flow Controller Configuration Tasks (Web Interface)
• smoothflow—For SmoothFlow function.
• youtube—For YouTube video delivery
• smoothstream-pub is not supported in Release 2.0.4
This steps merely creates the virtual player with default values, in many cases that may be
Ok for your needs. See
more configuration options.
3. Click Add.
4. Click Save at the top of the page to make changes persistent. See

Adding a Namespace (EZconfig)

To create a namespace using the EZconfig tab Add Namespace area:
1. Enter information in the text box:
• Namespace—Give the namespace a relevant name.
• URI-Prefix (required)—The uri-prefix refines what requests Media Flow Controller
accepts; see
• Domain—Specify a domain or use * (asterisk) to indicate any domain.
• HTTP Origin— Use HTTP for origin fetch of content not in cache; specify the
Hostname/IP Address of the origin server.
• NFS Origin—Use NFS for origin fetch of content not in cache; specify the Hostname/
IP Address of the origin server.
• Virtual Player—The namespace uses this virtual player instead of the default settings
of Network Parameters.
See "Configuring NameSpaces (Web Interface)" on page 179
options.
2. Click Add.
3. Click Save at the top of the page to make changes persistent. See

Enabling Interfaces (EZconfig)

To enable interfaces using the EZconfig tab Enable Interfaces area:
1. Specify IP addresses and netmasks for detected Ethernet interfaces; also, enable or
disable interfaces.
2. Click Apply.
3. Click Save at the top of the page to make changes persistent.

Restarting Services (EZconfig)

Several services require restart after making changes. Choose a Service Name and click
Restart.
Tip! When any changes are made to delivery protocols or network settings, you must restart
the mod-delivery service; use mod-ftp for changes made to FTP settings, and mod-log for
changes to logging settings. The mod-oom service (offline origin fetch manager) is provided
for debugging purposes only.
114 Configuring Media Flow Controller for the First Time (Web Interface) Copyright © 2010, Juniper Networks, Inc.
"Configuring Virtual Players (Web Interface)" on page 167
"uri-prefix" on page 34
Media Flow Controller Administrator's Guide
for usage details.
for more configuration
for
Figure 8 for graphic.
Figure 8 for graphic.