Aggregate-Label - Juniper JUNOS OS 10.3 - SOFTWARE Manual

Required Privilege
Level
Related
Documentation

aggregate-label

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
—For the default route to the destination. This is equivalent to specifying an IP
default
address of .
0.0.0.0/0
destination-prefix/prefix-length
address, and
prefix-length
The statement is explained separately.
policy
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Configuring Aggregate Routes
aggregate-label {
community community-name;
}
[edit logical-systems logical-system-name protocols bgp family inet labeled-unicast],
[edit logical-systems logical-system-name protocols bgp family inet-vpn labeled-unicast],
[edit protocols bgp family inet labeled-unicast],
[edit protocols bgp family inet-vpn labeled-unicast],
[edit protocols bgp family inet6 labeled-unicast]
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Enable aggregate labels for VPN traffic.
community community-name
the aggregate label.
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Configuring Aggregate Labels for VPNs
Chapter 73: Configuration Statements for Layer 3 Protocols
— destination-prefix is the network portion of the IP
is the destination prefix length.
—Specify the name of the community to which to apply
1717