Complete Software Guide for Junos
priority
Syntax
Hierarchy Level
Release Information
Description
Default
Options
Required Privilege
Level
Related
Documentation
1620
®
OS for EX Series Ethernet Switches, Release 10.3
priority priority;
[edit protocols mstp interface (all | interface-name)],
[edit protocols mstp msti msti-id interface interface-name],
[edit protocols rstp interface (all | interface-name)],
[edit protocols stp interface (all | interface-name)],
[edit protocols vstp vlan vlan-id interface (all | interface-name)]
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Statement updated in Junos OS Release 9.4 for EX Series switches to add VSTP support.
For Spanning Tree Protocol (STP), Rapid Spanning Tree Protocol (RSTP), VLAN Spanning
Tree Protocol (VSTP), or Multiple Spanning Tree Protocol (MSTP), specify the interface
priority to control which interface is elected as the root port.
The default value is 128.
—Interface priority. The interface priority must be set in increments of 16.
priority
Range: 0 through 240
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
show spanning-tree bridge on page 1644
show spanning-tree interface on page 1653
Example: Configuring Network Regions for VLANs with MSTP on EX Series Switches
on page 1541
Example: Configuring Faster Convergence and Improving Network Stability with RSTP
on EX Series Switches on page 1527
Understanding MSTP for EX Series Switches on page 1521
Understanding STP for EX Series Switches on page 1519
Understanding VSTP for EX Series Switches on page 1525
Copyright © 2010, Juniper Networks, Inc.