Bpdu-Timeout-Action - Juniper JUNOS OS 10.3 - SOFTWARE Manual

Complete Software Guide for Junos

bpdu-timeout-action

Syntax
Hierarchy Level
Release Information
Description
Required Privilege
Level
Related
Documentation
1602
®
OS for EX Series Ethernet Switches, Release 10.3
bpdu-timeout-action {
block;
alarm;
}
[edit protocols mstp interface (all | interface-name)],
[edit protocols rstp interface (all | interface-name)],
[edit protocols stp interface (all | interface-name)],
[edit protocols vstp vlan vlan-id interface (all | interface-name)]
Statement introduced in Junos OS Release 9.1 for EX Series switches.
Statement updated in Junos OS Release 9.4 for EX Series switches to add VSTP support.
Configure the BPDU timeout action on a specific interface. You must configure at least
one action ( alarm , block , or both).
The remaining statements are explained separately.
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
show spanning-tree bridge on page 1644
show spanning-tree interface on page 1653
Example: Configuring Network Regions for VLANs with MSTP on EX Series Switches
on page 1541
Example: Configuring Faster Convergence and Improving Network Stability with RSTP
on EX Series Switches on page 1527
Example: Configuring Loop Protection to Prevent Interfaces from Transitioning from
Blocking to Forwarding in a Spanning Tree on EX Series Switches on page 1569
Understanding Loop Protection for STP, RSTP, VSTP, and MSTP on EX Series Switches
on page 1523
Understanding VSTP for EX Series Switches on page 1525
Copyright © 2010, Juniper Networks, Inc.