Juniper JUNOS OS 10.3 - SOFTWARE Manual page 1749

show spanning-tree interface
Syntax
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
List of Sample Output
Output Fields
Copyright © 2010, Juniper Networks, Inc.
show spanning-tree interface
<brief | detail>
<interface-name interface-name>
<msti msti-id>
<vlan-id vlan-id>
Command introduced in Junos OS Release 9.0 for EX Series switches.
Display the configured or calculated interface-level spanning-tree protocol (can be either
STP, RSTP, or MSTP) parameters. In
administratively disabled or do not have a physical link.
none —(Optional) Display brief STP interface information.
—(Optional) Display the specified level of output.
brief | detail
interface-name interface-name
—(Optional) Display STP bridge information for the specified MSTP instance
msti msti-id
ID or Common and Internal Spanning Tree (CIST). Specify
from through for an MSTI.
1 4094
vlan-id vlan-id —(Optional) For MSTP interfaces, display interface information for the
specified VLAN. Specify a value from
view
show spanning-tree bridge on page 1644
Example: Configuring Network Regions for VLANs with MSTP on EX Series Switches
on page 1541
Understanding STP for EX Series Switches on page 1519
Understanding RSTP for EX Series Switches on page 1520
Understanding MSTP for EX Series Switches on page 1521
Understanding VSTP for EX Series Switches on page 1525
show spanning-tree interface on page 1654
show spanning-tree interface brief on page 1655
show spanning-tree interface detail on page 1655
show spanning-tree interface ge-1/0/0 on page 1656
Table 226 on page 1654 lists the output fields for the
command. Output fields are listed in the approximate order in which they appear.
Chapter 69: Operational Mode Commands for Spanning-Tree Protocols
mode, will not display interfaces that are
brief
—(Optional) Name of an interface.
through
0 4094
show spanning-tree Interface
0 for CIST. Specify a value
.
1653