Interface - Juniper JUNOS OS 10.3 - SOFTWARE Manual

interface

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
interface interface-name {
disable;
cost cost;
edge;
mode mode;
no-root-port;
priority priority;
}
[edit protocols mstp],
[edit protocols mstp msti msti-id],
[edit protocols rstp],
[edit protocols stp],
[edit protocols vstp vlan vlan-id]
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Statement updated in Junos OS Release 9.4 for EX Series switches to add VSTP support.
For Spanning Tree Protocol (STP), Rapid Spanning Tree Protocol (RSTP), VLAN Spanning
Tree Protocol (VSTP), or Multiple Spanning Tree Protocol (MSTP), configure an interface.
The edge , mode , and no-root-port
] hierarchy level.
msti msti-id
interface-name —Name of a Gigabit Ethernet interface.
The remaining statements are explained separately.
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
show spanning-tree bridge on page 1644
show spanning-tree interface on page 1653
Example: Configuring Network Regions for VLANs with MSTP on EX Series Switches
on page 1541
Example: Configuring Faster Convergence and Improving Network Stability with RSTP
on EX Series Switches on page 1527
Understanding MSTP for EX Series Switches on page 1521
Understanding RSTP for EX Series Switches on page 1520
Understanding STP for EX Series Switches on page 1519
Understanding VSTP for EX Series Switches on page 1525
Chapter 68: Configuration Statements for Spanning-Tree Protocols
options are not available at the [ edit protocols mstp
1613