Layer 3 Protocols Supported On Ex Series Switches; Layer 3 Protocols—Overview - Juniper JUNOS OS 10.3 - SOFTWARE Manual

CHAPTER 70
Layer 3 Protocols—Overview

Layer 3 Protocols Supported on EX Series Switches

Table 231: Supported Junos OS Layer 3 Protocol Statements and Features
Protocol Notes
BGP Fully supported.
BFD Fully supported.
ICMP Fully supported.
IGMPv1, v2 and v3 Fully supported.
IS-IS Supported, with the exceptions noted in "Layer 3
Protocols Not Supported on EX Series Switches" on
page 15.
MLD Supported on EX3200, EX4200, and EX8200
switches (MLD versions 1 and 2).
Copyright © 2010, Juniper Networks, Inc.
Layer 3 Protocols Supported on EX Series Switches on page 1667
Layer 3 Protocols Not Supported on EX Series Switches on page 1668
Understanding Distributed Periodic Packet Management on EX Series
Switches on page 1670
Understanding VRRP on EX Series Switches on page 1671
Understanding IPsec Authentication for OSPF Packets on EX Series Switches on page 1674
EX Series switches support the Junos OS Layer 3 features and configuration statements
listed in Table 15 on page 14:
For More Information
See the Junos OS Routing Protocols Configuration
Guide at
http://www.juniper.net/techpubs/software/junos/
See the Junos OS Routing Protocols Configuration
Guide at
http://www.juniper.net/techpubs/software/junos/
See the Junos OS Routing Protocols Configuration
Guide at
http://www.juniper.net/techpubs/software/junos/
See the Junos OS Multicast Configuration Guide at
http://www.juniper.net/techpubs/software/junos/
See the Junos OS Routing Protocols Configuration
Guide at
http://www.juniper.net/techpubs/software/junos/
See the Junos OS Multicast Configuration Guide at
http://www.juniper.net/techpubs/software/junos/
.
.
.
.
.
1667