Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual page 1208

output definitions
Reception From Client
Forw Delay Violation
Max Hops Violation
Agent Info Violation
Invalid Gateway IP
Invalid Agent Info From
Server
Delta
Server
Tx Server
Delta
Release History
Release 6.1; command was introduced.
Release 6.1.2; new fields added.
Related Commands
show ip helper
MIB Objects
iphelperStatTable
iphelperServerAddress
iphelperRxFromClient
iphelperTxToServer
iphelperMaxHopsViolation
iphelperForwDelayViolation
iphelperResetAll
page 20-64
Number of packets DHCP Relay has received from the DHCP client.
Number of packets dropped as a result of forward delay violations. A
violation occurs if a client packet contains an elapsed boot time value
that is less than the configured DHCP Relay forward delay time value.
Number of packets dropped as a result of maximum hop violations. A
violation occurs if a packet contains a hop count equal to or greater than
the configured DHCP Relay maximum hops value.
Number of packets dropped as a result of a relay agent information
(Option-82) violation. A violation occurs if an Option-82 DHCP packet
contains a zero gateway IP address (giaddr) and the relay agent infor-
mation policy is set to Drop or a DHCP packet has no Option-82 field
and contains a non-zero giaddr.
Number of packets dropped as a result of a gateway IP violation. A vio-
lation occurs if an Option-82 DHCP packet contains a gateway IP
address (giaddr) that matches a local subnet address.
Number of invalid Option-82 DHCP server packets dropped by the
relay agent.
Total number of packets processed since the last time the ip helper sta-
tistics were checked during any user session.
DHCP server IP address that receives BOOTP/DHCP packets for-
warded by this DHCP Relay service. Use the
mand to add or remove DHCP server IP addresses from DHCP Relay
configuration.
Number of packets DHCP Relay has transmitted to the DHCP server.
The difference between the number of packets received from the client
and the number of packets transmitted to the DHCP server since the last
time DHCP Relay statistics were checked during any user session.
Displays current DHCP Relay configuration information.
DHCP Relay Commands
ip helper address
OmniSwitch CLI Reference Guide
com-
June 2012