Disabling Up/Down Log Output On A Port - 3Com 4210 PWR Configuration Manual

Disabling Up/Down
Log Output on a Port
Disable Up/Down log
output on a port
Configuration example
Table 67 Set the interval to perform statistical analysis on port traffic
Operation
Enter system view
Enter Ethernet port view
Set the interval to perform
statistical analysis on port
traffic
An Ethernet port has two physical link statuses: UP and Down. When the physical
link status of an Ethernet port changes, the switch will send log to the log server,
which in turn acts accordingly. If the status of Ethernet ports in a network changes
frequently, large amount of log information may be sent, which increases work
load of the log server and consumes more network resources.
You can limit the amount of the log information sent to the log server by disabling
the Up/Down log output function on Ethernet ports.
n
After you allow a port to output the Up/Down log information, if the physical link
status of the port does not change, the switch does not send log information to
the log server but monitors the port in real time.
Table 68 Disable UP/Down log output on a port
Operation
Enter system view
Enter Ethernet port view
Disable a port from outputting
UP/Down Log Information
By default, UP/Down log information output is enabled.
# By default, a port is allowed to output the Up/Down log information. Execute
the shutdown command or the undo shutdown command on Ethernet 1/0/1,
and the system outputs Up/Down log information of Ethernet 1/0/1.
<4210> system-view
System View: return to User View with Ctrl+Z.
[4210] interface Ethernet 1/0/1
[4210-Ethernet1/0/1] shutdown
%Apr 5 07:25:37:634 2000 4210 L2INF/5/PORT LINK STATUS CHANGE:- 1 -
Ethernet1/0/1 is DOWN
[4210-Ethernet1/0/1] undo shutdown
%Apr 5 07:25:56:244 2000 4210 L2INF/5/PORT LINK STATUS CHANGE:- 1 -
Ethernet1/0/1 is UP

Disabling Up/Down Log Output on a Port

Command
system-view
interface interface-type
interface-number
flow-interval interval
Command
system-view
interface interface-type
interface-number
undo enable log updown
103
Description
-
-
Optional
By default, this interval is 300
seconds.
Remarks
-
-
Required