How To Load And Play Waveform Files - Emerson R&S SGT100A User Manual

®
R&S SGT100A
5. Select "ARB > State > On".
The R&S SGT processes the waveform file.

8.5 How to load and play waveform files

Irrespective of the way a waveform file is generated, you can transfer it to the instru-
ment, load it in the ARB and play it.
To load and play a waveform file from the instrument
1. To transfer an externally created waveform file to the instrument, see
"Managing files on the R&S
2. Select "Baseband > ARB > General".
3. Set "Waveform Location > Instrument".
4. To load the waveform file, proceed as follows:
a) Select "Load Waveform".
b) Navigate to the directory in which you saved the file.
c) Select the waveform file (e.g. /var/user/lte_waveform).
d) Click "Select" to finish loading.
The "ARB" dialog confirms that the waveform file is loaded.
5. Select "ARB > State > On".
The R&S SGT processes the waveform file.
To load and play a waveform file from an external computer
1. Connect the R&S SGT and a Windows PC with an installed R&S SGMA-GUI to the
same network.
2. On the remote PC, select "SGMA-GUI > Instrument Name > Baseband > ARB >
General".
3. Set "Waveform Location > Local file system".
4. To load the waveform file, proceed as follows:
a) Select "Load Waveform".
b) Navigate to the directory in which you saved the file.
c) Select the waveform file (e.g. /var/user/lte_waveform).
d) Click "Select" to finish loading.
Note: You can also select an external USB connected to the PC at the available
local file directories.
The "ARB" dialog confirms that the waveform file is loaded.
User Manual 1176.8674.02 ─ 12
Performing configuration tasks
How to load and play waveform files
SGT", on page 50.
Chapter 4.2,
305